Cordierite Diesel Honeycomb Ceramic Filter DPF Honeycomb Ceramic

• Body Material: Ceramic
• Discharge Standard: Euro IV
• Certification: ISO9001, TS16949
• Component: Catalytic Converter
• Application: Auto/Motorcycle Gas Treatment
• Size: 320*430mm, 240*305mm,144*152.4mm etc
• Model NO.: DPF
• Cell: 100-600cpsi
• Material: Cordierite
• Transport Package: Wooden Box/Carton Box with Pallet
• Trademark: DXY
• Origin: China
• Production Capacity: 100, 000pieces/Month

Product Description

Cordierite-based Diesel Particulate Filter
The particulate of emission is captured inside thin gas hole or entrance. As it lasts, the cumulated
Layer become thick, and pressure loss increase. To ensure the performance of engine, when
Pressure loss reaches some value, it is a must to recycle the filter. The recycle is making the
Particulate burning, by raising the gas temperature of filter.

The particulate condition is related to the oxygen concentration. Normally, it is burning at
550-650. Its adopted to raise emission temperature by adjusting throttle, and increase gas temperature
With burner. The particulate burning temperature can be decreased by catalyzed, making cumulative
Particulate burning as soon as possible, thus recover the pressure loss and fitters performance, then
The filter is recycled.

Item		Unit	Normal Value	Inspection Method
Chemical Composition	Al2O3	%	35.4 ± 1.5	Chemical Analysis (Titration)
	SiO2	%	50.9 ± 1.5
	MgO	%	13.5 ± 1.5
Room temperature Compressive Strength		Mpa	≥10.0	Compressive Strenght Tester
Porosity		%	≥50	Weighting
Maximum Use Temperature		celsius degree	1400	High Temperature Oven
(800celsius degree)CTE		10-6/celsius degree	≤1.2	NETZSCH DIL 402 PC Dilatometer
The average of pore diameter		μm	10~15